3 Precautions to Remember in Protecting Your Low Slope Roof

Low-slope roofing in Jeffersonville, VT, is popular for commercial structures. They provide improved water runoff and energy efficiency compared to steeply pitched roofs. Although this type of roof is popular and offers benefits, facility managers should take three precautions to avoid difficulties.
Proper Roof Installation and Protection
The most prevalent cause of a damaged low-slope roof is improper installation. When it comes to built-up roofs (BUR), not every roofer is certified to install a low-slope roof. Before selecting roofing contractors in Jeffersonville, VT, thoroughly investigate them to ensure they are qualified and educated about this type of roof.
For example, if you choose a BUR, the roofer must be aware of blistering or ridge formation hazards due to a moist substrate or improper membrane torching. 
Another example is correct gutter installation and fascia, flashing, and soffit for additional water and wildlife protection. If a roofer encourages you to go with a shingle-style roof on a low-slope roof, you should be aware that these are not the best materials for the job and can lead to leaks.
#1: Lacking Protection From Foot Traffic on Roof 
Any maintenance expert must avoid leaving hardware or tools on a roof. The roof must also be addressed with caution regarding foot traffic. Some people disregard roof safety precautions because a low-slope roof appears safer and more sturdy to walk on.
Unfortunately, no matter what material a low-slope roof is built of, haphazard foot traffic can readily harm it.
The building owner should require everyone who needs roof access to utilize work blankets as a barrier between their feet and any tools on the roof. If there are locations on the roof that get a lot of foot traffic, such as paths to HVAC systems, exterior doors, or permanently fixed ladders, walk mats should be installed semi-permanently to prevent wear and tear.
#2: Ignoring Roof Maintenance Following Installation
Ignoring appropriate roof maintenance is the most common cause of low-slope roof deterioration. An annual complete roof check is essential for recognizing possible problems before they turn into costly repairs. This should ideally be done by a roofing professional who understands what to look for, but in-house facility workers may be able to accomplish it on modern roofs.
Taking care of the roof entails cleaning debris and inspecting it after storms. It also entails the removal of snow in the winter to avoid the formation of ice dams. Because specific roof maintenance is frequently linked to roof material, a roofing contractor will be best able to explain what needs to be done to keep the roof in good working order.
#3: Cleaning is Required
Water might build in some parts of your low-sloped roof when it rains. It becomes pooling or "ponding" water if it does not evaporate within 48 hours after the rain ceases. This can be caused by poor workmanship, clogged drains, or a combination of the two. If this isn't remedied, the pooled water will hasten the destruction of your roof and encourage algae growth. This causes extra damage, and you'll have to pay for a pricey roof repair.
Keeping your drainage systems clean is one technique to avoid water pooling or ponding. Remember that dirt and debris accumulate on your low-sloped roof over time. They get swept over and slowly clog your drains when it rains. This happens if you don't sweep out the debris regularly, which can eventually cause structural damage. The simplest method to avoid this is to have your roof cleaned regularly by a skilled roofing company that fully understands how to remove obstacles and dirt.
Three Mountain Roofing offers a comprehensive range of roofing services to homeowners and businesses in Vermont, including new installations and storm restoration on a shingle, EPDM, and standing seam roofs. Contact us if you have questions on roofing in Jeffersonville, VT.

Comments (0)

Leave a comment